Power Factor Correction in the Presence of Harmonics
Phone  :  586.979.9955
Fax  :  586.979.9484

HomeAboutProductsServicesResourcesNewsContact Us

Products > Harmonic Filters

Harmonic Filters

Harmonics are multiples of a fundamental frequency. For example, in a 60 Hz system, the 5th harmonic is 300 Hz. The total amount of harmonics in a power system is referred to as Total Harmonic Distortion (THD).

Harmonics are caused by non-linear load devices such as variable frequency drives, AC to DC converters, and UPS systems. Harmonics when present in a power system, often result in higher voltages and currents. This condition is known as poor power quality.
The Autocapacitrap™ and the ZT Capacitrap should be applied where the need for harmonic mitigation varies.

Automatically-switched passive filter for loads that vary; located at plant distribution center or service entrance.
Learn More >

Fast-acting thyristor switches insert and remove capacitance in as little as 5-8 milliseconds. The RSS uses soft-switching technology to provide transient free switching of capacitors.
Learn More >

MYRON ZUCKER INC. products are designed to:

  • Improve power factor
  • Eliminate utility penalties or surcharges
  • Increase available distribution capacity
  • Mitigate harmonic distortion
  • Protect sensitive equipment
  • Decrease downtime
  • Reduce line losses and associated cost
  • Comply with industry standards


Myron Zucker, Inc.
36825 Metro Court
Sterling Heights, MI 48312
Phone: 586.979.9955
Fax: 586.979.9484
Email: [email protected]